  
                        MP064 User's Manual
                Intel FX Triton Pentium Motherboard


Foreword
========
This manual is designed to provide the basic necessary information for
the end user to understand and properly use the MP064 mainboard. The
mainboard ensures superlative performance and complete compatibility
with industry standards, which incorporating many technical
enhancements.


Trademarks
==========
WTC is a registered trademark of Win Technologies Co., Ltd. All 
trademarks belong to their registered owner.


Checklist
=========
Your MP064 Cache package contains the following:

* MP064 Cache mainboard
* User's Manual.
* HDD/FDD Cable
* Coml & ComZ Cable
* Printer Cable


Precautions
===========
Make sure you ground yourself before handling the mainboard or other
system components. Electrostatic discharge will damage mainboard.Note
that you must take special precaution when handling the mainboard in
dry or air-conditioned environments.

The precaution below is to protect the mainboard from electrostatic discharge.
* Do not remove the anti-static packaging until you are ready to install the mainboard
 and other system components.
* Ground vourselfbefore removing any system component from its protective anti-
 static packaging. To ground yourself , grasp the expansion slot covers or other
 unpainted portion computer chassis.
* Frequently ground yourself while working , or use a grounding strap.
* Handle the mainboard by the edges and avoid touching its components.


Mainboard Features
==================
* Intel Triton PCI chipset: 82437 (TSC)/82438(TDP)/82371FB (PIIX)
* Support P54C/P55C Microprocessor, system running up to 200 Mhz
* Support High performance 32bits PCI local bus and provide four PCI
 bus master
* Support four 16bits ISA system bus I/O slot
*On-Board Synchronous Cache Option 256KB AND 512KB
* Direct mapped organization with write through / write back selection
* Main memory (DRAM) support from 4MB to 128MB, using standard
page mode or EDO mode DRAM
* Support Enhance IDE onboard
* PnP (Plug & Play) compatible I/O (Serial port , Parallel port ,
 FDC )onboard


Jumper and Connectors Reference
===============================
Before installing the mainboard, make sure that the jumper setting are properly set for
your configuration. The function of different jumpers are respectively as follows:

CPU Internal Clock Multiplier ............................ JP31, JP32
CPU Clock Frequency Selector ............................. JP17, JPl8
CPU Voltage Selector ..................................... JP36, JP37

Cache Option ............................................. JP20

Flash ROM Voltage Selector ............................... JP14
CMOS Charge/ Discharge ................................... JP13
AT Bus Speed Selector .................................... JP15


Mainboard Connectors:
=====================
Onboard HDD LED Connector ................................ J3
Reset Switch Connector.................................... J2
Speaker Connector ........................................ J1
Keylock and Power LED Connector........................... J4
PS/2 mouse Connector ..................................... MS2, MS1
Keyboard Connector ....................................... KB2
Power Supply Connector ................................... PW1
Turbo Switch Connector ................................... TB/SW
Turbo LED Connector ...................................... TB/LED

Jumper Caps reference :
=======================
Red          Jumper for           Voltage Selector
White        Jumper for           CPU Type
Yellow       Jumper for           Clock Selector
Blue         Jumper for           Cache Option
Black        Jumper for           Other

                                 
Intel CPU Type Configuration
============================
CPU type configuration will give you detailed information to install the jumper
setting of P54C type of CPU. If the CPU type you are using is not listed in our user's
manual,please contact your dealer for the correct jumper setting.


CPU Clock Jumper Setting (reversion A)
======================================
(Intel CPU)
CPU CLOCK  JP17  JP18   JP31   JP32   CLOCK FREQUENCI MODULATION
75  MHZ    CLOSE CLOSE  OPEN   OPEN   5OMHz   x 1.5
100 MHZ    CLOSE CLOSE  OPEN   CLOSE  5OMHz   x 2 (6x86-P120+ )
90  MHZ    OPEN  CLOSE  OPEN   OPEN   60MHz   x 1.5
120 MHZ    OPEN  CLOSE  OPEN   CLOSE  60MHz   x 2 ( 6x86-P150+ )
150 MHZ    OPEN  CLOSE  CLOSE  CLOSE  60MHz   x 2.5
100 MHZ    CLOSE OPEN   OPEN   OPEN   66.6MHz x 1.5
133 MHZ    CLOSE OPEN   OPEN   CLOSE  66.6MHz x 2 ( 6x86-P166+ )
166 MHZ    CLOSE OPEN   CLOSE  CLOSE  66.6MHz x 2.5
180 MHZ    OPEN  CLOSE  CLOSE  OPEN   60MHz   x 3
200 MHZ    CLOSE OPEN   CLOSE  OPEN   66.6MHz x 3


CPU Clock Jumper Setting (reversion B)
======================================
(Intel CPU - Single voltage)
CPU CLOCK    JP17   JP18   JP31   JP32  JP29     JP36  JP37   JP38  CLOCK
75 MHz       CLOSE  CLOSE  OPEN   OPEN  1-2,3-4  1-2   OPEN   1-2   50x1.5
                                        5-6
100 MHz      CLOSE  CLOSE  OPEN   CLOSE 1-2,3-4  1-2   OPEN   1-2   50x1.5
                                        5-6
90 MHz       OPEN   CLOSE  OPEN   OPEN  1-2,3-4  1-2   OPEN   1-2   60x1.5
                                        5-6
120 MHz      OPEN   CLOSE  OPEN   CLOSE 1-2,3-4  1-2   OPEN   1-2   60x2
                                        5-6
150 MHz      OPEN   CLOSE  CLOSE  CLOSE 1-2,3-4  1-2   OPEN   1-2   66.6x2.5
                                        5-6
100 MHz      CLOSE  OPEN   OPEN   OPEN  1-2,3-4  1-2   OPEN   1-2   66.6x1.5
                                        5-6
133 MHz      CLOSE  OPEN   OPEN   CLOSE 1-2,3-4  1-2   OPEN   1-2   66.6x2
                                        5-6
166 MHz      CLOSE  OPEN   CLOSE  CLOSE 1-2,3-4  1-2   OPEN   1-2   66.6x2.5
                                        5-6
180 MHz      OPEN   CLOSE  CLOSE  OPEN  1-2,3-4  1-2   OPEN   1-2   60x3
                                        5-6
200 MHz      CLOSE  OPEN   CLOSE  OPEN  1-2,3-4  1-2   OPEN   1-2   66.6x3
                                        5-6

(Intel CPU - Dual voltage)
CPU CLOCK    JP17   JP18   JP31   JP32  JP29     JP36  JP37   JP38  CLOCK
166 MHz      CLOSE  OPEN   CLOSE  CLOSE OPEN     1-2   2-3    2-3   66.6x2.5
180 MHz      OPEN   CLOSE  CLOSE  OPEN  OPEN     1-2   2-3    2-3   60x3
200 MHz      CLOSE  OPEN   CLOSE  OPEN  OPEN     1-2   2-3    2-3   66.6x3

* JP37 Set      1-2: 2.6 Volt           * JP38 Set     1-2     : Single Volt
                2-3: 2.8 Volt                          2-3     : Dual Volt

* JP36 Set      1-2 : 3.55 Volt         * JP29 Set     Close   : Single Volt
                2-3 : 3.45 Volt                        Open    : Dual Volt


CYRIX CPU Clock Jumper Setting And Voltage Selector
===================================================
(Single Voltage)
CPU CLOCK    JP17   JP18   JP31   JP32  JP29     JP36  JP37   JP38  CLOCK
P120+        CLOSE  CLOSE  OPEN   CLOSE 1-2,3-4  1-2   OPEN   1-2   50x2
                                        5-6
P150+        OPEN   CLOSE  OPEN   CLOSE 1-2,3-4  1-2   OPEN   1-2   60x2
                                        5-6
P166+        CLOSE  OPEN   OPEN   CLOSE 1-2,3-4  1-2   OPEN   1-2   66.6x2
                                        5-6

(Dual Voltage)
CPU CLOCK    JP17   JP18   JP31   JP32  JP29     JP36  JP37   JP38  CLOCK
P120+        CLOSE  CLOSE  OPEN   CLOSE OPEN     1-2   1-2    2-3   50x2
P150+        OPEN   CLOSE  OPEN   CLOSE OPEN     1-2   1-2    2-3   60x2
P166+        CLOSE  OPEN   OPEN   CLOSE OPEN     1-2   1-2    2-3   66.6x2


AMD CPU Clock Jumper Setting And Voltage Selector
=================================================
(Single Voltage)
CPU CLOCK    JP17   JP18   JP31   JP32  JP29     JP36  JP37   JP38  CLOCK
P75          CLOSE  CLOSE  OPEN   OPEN  1-2,3-4  1-2   OPEN   1-2   50x1.5
                                        5-6
P90          OPEN   CLOSE  OPEN   OPEN  1-2,3-4  1-2   OPEN   1-2   60x1.5
                                        5-6
P100         CLOSE  OPEN   OPEN   OPEN  1-2,3-4  1-2   OPEN   1-2   66.6x1.5
                                        5-6

(Dual Voltage)
CPU CLOCK    JP17   JP18   JP31   JP32  JP29     JP36  JP37   JP38  CLOCK
K5-P100      CLOSE  CLOSE  OPEN   OPEN  OPEN     1-2   1-2    2-3   50x1.5
K5-P120      OPEN   CLOSE  OPEN   OPEN  OPEN     1-2   1-2    2-3   60x1.5
K5-P133      CLOSE  OPEN   OPEN   OPEN  OPEN     1-2   1-2    2-3   66x1.5
K5-P150      OPEN   CLOSE  OPEN   CLOSE OPEN     1-2   1-2    2-3   60x2
K5-P166      CLOSE  OPEN   OPEN   CLOSE OPEN     1-2   1-2    2-3   66x2

NOTE: Please pay attention to your CPU voltage and Jumper number
      of motherboard reversion.


SRAM Configuration
==================
SIZE             JP 20       TAG RAM
256K             OPEN        8Kx8
512K             1-2         16Kx8


CPU Voltage Selector
====================
   VOLTAGE      JP36           CPU VOLTAGE SPEC
    3.45V       2-3            FOR INTEL P54C STANDARD CPU
    3.55V       1-2            FOR INTEL P54C VRE CPU


OTHER JUMPERS
=============
JP15   ( AT BUS SPEED SELECTOR )
1-2    PCI CLOCK V3
2-3    PCI COLCK V4

JP14   ( FLASH ROM VOLTAGE SELOCTOR )
1-2    FLASH ROM 12 VOLTS (INTEL BRAND)
2-3    FLASH ROM 5 VOLTS (SST BRAND)

JP13   ( CMOS CHARGE / DISCHARGE )
OPEN   CHARGE CMOS
CLOSE  RESET CMOS

MS2    ( PS/2 MOUSE CONNECTOR )
KB2    ( KEYBOARD CONNECTOR )
PW1    ( POWER SUPPLY CONNECTOR )


Memory Configuration
====================
IMPORTANT: Do not useSIMM modules with more that 24 chips per module with
         this mainboard . Module with more that 24 chips exceeds the design
         specification of the memory subsystem and will cause unreliable
         operation.


Memory Module Combinations
==========================
Bank O          Bank 1                Total Memory Using Sockets
Socket 1 & 2    Socket 3 & 4          1 through 4

4MB x 2         None                  8MB
8MB x 2         None                  16MB
16MB x 2        None                  32MB
32MB x 2        None                  64MB
None            4MB x 2               8MB
None            8MB x 2               16MB
None            16MB x 2              32MB
None            32MB x 2              64MB
4MB x 2         4MB x2                16MB
4MB x 2         8MB x 2               24MB
4MB x 2         16MB x 2              40MB
4MB x 2         32MB x 2              64MB
8MB x 2         4MB x 2               24NB
8MB x 2         8MB x 2               32MB
8MB x 2         16MB x 2              48MB
8MB x 2         32MB x 2              80MB
16MB x 2        4MB x 2               40MB
16MB x 2        8MB                   48MB
16MB x 2        16MB x 2              64MB
16MB x 2        32MB x 2              96MB
32MB x 2        4MB x 2               72MB
32MB x 2        8MB x 2               80MB
32MB x 2        16MB x 2              96MB
32MB x 2        32MB x 2              128MB



